C1352 Nissan : Increasing Pressure Solenoid Malfunction Front Right
If you own a Nissan and have encountered the C1352 code, you may be wondering . This code refers to an issue with the increasing pressure solenoid malfunction on the front right side of the vehicle. It can cause a variety of problems with your car’s performance, including issues with shifting and acceleration. Fortunately, there are steps you can take to diagnose and repair the issue, whether you choose to do it yourself or take it to a professional mechanic.
In this article, we’ll explore what the C1352 code means, what causes it, and how to fix it.
Key Takeaways:
Meaning: C1352 code in Nissan indicates a malfunction in the increasing pressure solenoid of the front right wheel.
Causes: The code can be triggered by a faulty solenoid, damaged wiring, or a failed ABS control module.
Symptoms: Symptoms of C1352 code include ABS warning light, traction control light, and decreased braking performance.
Fixes: Fixing the code involves replacing the faulty solenoid, repairing damaged wiring, or replacing the ABS control module.
C1352 Code Nissan:
The C1352 code in Nissan vehicles refers to an issue with the increasing pressure solenoid in the front right of the car.
This solenoid is responsible for regulating the pressure in the transmission system, and when it malfunctions, it can cause a variety of problems with the vehicle’s performance.
What are the Signs or Symptoms of the C1352 Code in Nissan?
Here are some of the most common signs of the C1352 code:
- Warning light: The first and most obvious sign of the C1352 code is the illumination of the check engine light on the dashboard. This light can indicate a wide range of issues, but if it is accompanied by other symptoms, it is likely related to the increasing pressure solenoid malfunction.
- Transmission problems: The increasing pressure solenoid is responsible for regulating the pressure in the transmission. If this solenoid is malfunctioning, you may experience problems with shifting gears or notice that your transmission is slipping or jerking.
- Reduced fuel efficiency: A malfunctioning solenoid can also cause your vehicle to use more fuel than usual. This is because the transmission may not be operating efficiently, which can lead to increased fuel consumption.
- Strange noises: In some cases, a malfunctioning solenoid can cause strange noises to come from the transmission. You may hear whining, buzzing, or humming sounds that are not typical of your vehicle.
- Difficulty accelerating: If the solenoid is not regulating the pressure in the transmission properly, you may notice that your vehicle has difficulty accelerating or feels sluggish when you press the gas pedal.
Possible Causes of C1352 Code in Nissan
The C1352 code in Nissan indicates an issue with the increasing pressure solenoid malfunction in the front right of the vehicle. This code can be triggered due to various reasons, including:
- Faulty solenoid: The most common cause of the C1352 code is a malfunctioning solenoid. The solenoid may have failed due to wear and tear or electrical issues.
- Wiring issues: The wiring that connects the solenoid to the vehicle’s computer may be damaged or corroded, causing a communication error and triggering the code.
- Low transmission fluid: If the transmission fluid level is low, it can cause the solenoid to malfunction and trigger the code.
- Dirty transmission fluid: If the transmission fluid is dirty or contaminated, it can cause the solenoid to malfunction and trigger the code.
- Failed transmission control module: In rare cases, the C1352 code may be triggered due to a failed transmission control module. This is a more serious issue that requires professional diagnosis and repair.
Fixes for C1352 Code in Nissan Vehicles
The C1352 code in Nissan vehicles indicates a malfunction in the increasing pressure solenoid of the front right wheel. This can cause issues with the vehicle’s stability control system and affect its overall performance. Here are some fixes for this code:
1. Check the wiring and connections: The first step in fixing the C1352 code is to check the wiring and connections of the increasing pressure solenoid. Make sure that all the connections are secure and free from corrosion or damage. If there are any issues with the wiring, repair or replace it as necessary.
2. Replace the increasing pressure solenoid: If the wiring and connections are in good condition, the next step is to replace the increasing pressure solenoid. This component is responsible for regulating the pressure in the brake system, and a malfunctioning solenoid can cause issues with the stability control system. Replace the solenoid with a new one to fix the problem.
3. Check the brake fluid level: Low brake fluid levels can also cause issues with the stability control system and trigger the C1352 code. Check the brake fluid level and add more if necessary. If the brake fluid level is consistently low, there may be a leak in the brake system that needs to be repaired.
4. Check the brake pads and rotors: Worn brake pads and rotors can also cause issues with the stability control system and trigger the C1352 code. Check the condition of the brake pads and rotors and replace them if necessary. This will ensure that the brake system is functioning properly and prevent any further issues with the stability control system.
5. Reset the system: After making any repairs or replacements, it’s important to reset the system and clear the C1352 code. This can be done using a diagnostic tool or by disconnecting the battery for a few minutes. Once the system is reset, test drive the vehicle to ensure that the issue has been resolved.
How Much Will It Cost to Fix the C1352 Code in a Nissan?
The C1352 code in a Nissan indicates an issue with the increasing pressure solenoid malfunction in the front right of the vehicle. The cost to fix this code can vary depending on the severity of the issue and the specific model of the Nissan.
In general, the cost to fix the C1352 code can range from $100 to $500. This cost includes the diagnosis of the issue, replacement of any faulty parts, and labor costs. However, if the issue is more severe and requires extensive repairs or replacement of major components, the cost can increase significantly.
Possible Causes and Fixes of Code C1352 Nissan
| Possible Cause | Fix | Cost to Fix |
|---|---|---|
| Malfunctioning increasing pressure solenoid front right | Replace increasing pressure solenoid front right | $150-$300 |
| Wiring issues in the increasing pressure solenoid circuit | Repair or replace wiring in the increasing pressure solenoid circuit | $100-$200 |
| Malfunctioning ABS control module | Replace ABS control module | $500-$1000 |
| Low brake fluid level | Refill brake fluid to proper level | $10-$20 |
| Malfunctioning brake master cylinder | Replace brake master cylinder | $300-$500 |
How Serious is the C1352 Code in Nissan?
The C1352 code in Nissan indicates a malfunction in the increasing pressure solenoid of the front right wheel. This can cause issues with the vehicle’s stability control system and may result in reduced handling and braking performance.
While this code may not immediately affect the drivability of the vehicle, it is important to address the issue as soon as possible to prevent further damage and potential safety hazards.
If left unaddressed, the malfunctioning solenoid can cause damage to other components of the vehicle’s stability control system, leading to more expensive repairs down the line.
Can You Still Drive with the C1352 Code on Your Nissan?
If your Nissan is showing the C1352 code, it means that there is a malfunction in the increasing pressure solenoid on the front right side of the vehicle. While it is possible to still drive with this code, it is not recommended.
The increasing pressure solenoid is an important component of your Nissan’s transmission system, and a malfunction can lead to serious issues with shifting and overall performance. Continuing to drive with this code could potentially cause further damage to your vehicle and result in costly repairs.
Conclusion
The C1352 code in Nissan vehicles indicates a malfunction in the increasing pressure solenoid in the front right of the car. This can cause issues with the transmission and affect the overall performance of the vehicle. To fix this issue, it is recommended to take the car to a certified mechanic who can diagnose and repair the problem. Ignoring this issue can lead to further damage and costly repairs in the future.
FAQ
What is a C1352 code in Nissan?
A C1352 code in Nissan indicates an increasing pressure solenoid malfunction in the front right of the vehicle.
What are the symptoms of a C1352 code in Nissan?
The symptoms of a C1352 code in Nissan include a malfunction indicator lamp (MIL) illumination, decreased fuel efficiency, and poor vehicle performance.
What causes a C1352 code in Nissan?
A C1352 code in Nissan is typically caused by a faulty increasing pressure solenoid, damaged wiring or connectors, or a malfunctioning powertrain control module (PCM).
How can I diagnose a C1352 code in Nissan?
To diagnose a C1352 code in Nissan, you will need an OBD-II scanner to read the code and identify the specific issue. You may also need to perform a visual inspection of the wiring and connectors to check for any damage or corrosion.
How can I fix a C1352 code in Nissan?
To fix a C1352 code in Nissan, you may need to replace the increasing pressure solenoid, repair any damaged wiring or connectors, or replace the PCM if it is malfunctioning. It is recommended to seek the assistance of a professional mechanic for proper diagnosis and repair.
Learn about more c codes in Nissan here.
