P1336 Nissan:Crankshaft Position Sensor
If you own a Nissan and have been experiencing engine problems, you may have come across the P1336 code. This code indicates an issue with the crankshaft position sensor, which is a crucial component in the engine’s operation.
Fortunately, fixing this problem is relatively straightforward and can be done with a few simple steps. In this article, we’ll discuss what the P1336 code means, what causes it, and how to fix it. So, let’s get started!
Key Takeaways
Meaning: P1336 code in Nissan indicates a problem with the crankshaft position sensor.
Causes: Faulty sensor, damaged wiring, or a malfunctioning engine control module (ECM) can cause this code.
Symptoms: Engine misfires, stalling, difficulty starting, and poor acceleration are some of the symptoms of P1336 code.
Fixes: Replacing the sensor, repairing the wiring, or replacing the ECM are some of the fixes for P1336 code in Nissan.
P1336 Code Nissan Meaning
The P1336 code in a Nissan vehicle indicates a problem with the crankshaft position sensor. This sensor is responsible for monitoring the position and speed of the crankshaft, which is a crucial component in the engine’s operation. When the sensor detects an issue, it sends a signal to the engine control module (ECM), which triggers the P1336 code.
Signs and Symptoms of P1336 Code in Nissan
Here are some of the most common signs and symptoms of the P1336 code in Nissan:
- Check Engine Light: The most obvious symptom of the P1336 code is the illumination of the check engine light on your dashboard. This light can indicate a range of issues, but if it is accompanied by other symptoms, it is likely related to the crankshaft position sensor.
- Engine Misfires: A faulty crankshaft position sensor can cause the engine to misfire or run rough. This can be especially noticeable when accelerating or at high speeds.
- Stalling or Starting Issues: If the sensor is not providing accurate information to the engine control module, it can cause the engine to stall or have difficulty starting. This can be a safety issue, especially if it happens while driving.
- Poor Fuel Economy: A malfunctioning crankshaft position sensor can also cause the engine to use more fuel than necessary, leading to decreased fuel economy and higher costs at the pump.
- Reduced Power and Performance: If the engine is not receiving accurate information from the sensor, it may not be able to perform at its best. This can result in reduced power and performance, making it difficult to accelerate or maintain speed.
P1336 Code Nissan Possible Causes
Here are some of the possible causes of the P1336 code:
- Faulty crankshaft position sensor: The most common cause of the P1336 code is a faulty crankshaft position sensor. Over time, the sensor can become worn or damaged, causing it to send incorrect signals to the ECM. This can lead to a variety of problems, including misfires, rough idling, and reduced power.
- Wiring issues: Another possible cause of the P1336 code is wiring issues. If the wiring that connects the sensor to the ECM is damaged or corroded, it can cause the sensor to malfunction. This can lead to a variety of problems, including poor performance and reduced fuel efficiency.
- ECM issues: In some cases, the problem may be with the ECM itself. If the ECM is not receiving the correct signals from the crankshaft position sensor, it may not be able to control the ignition timing and fuel injection properly. This can lead to a variety of problems, including misfires, rough idling, and reduced power.
- Timing chain issues: In rare cases, the P1336 code may be caused by issues with the timing chain. If the timing chain is worn or damaged, it can cause the crankshaft position sensor to send incorrect signals to the ECM. This can lead to a variety of problems, including misfires, rough idling, and reduced power.
Fixes for P1336 Code Nissan
Here are some of the fixes for the P1336 code:
- Replace the crankshaft position sensor: This is the most common fix for the P1336 code. If the sensor is faulty, it needs to be replaced with a new one. The replacement process is relatively simple and can be done by a mechanic or DIY enthusiast.
- Check the wiring and connections: Sometimes, the problem may not be with the sensor itself but with the wiring or connections. If there is a loose or damaged wire, it can cause the sensor to malfunction. Check the wiring and connections and repair or replace any damaged parts.
- Check the reluctor wheel: The reluctor wheel is a component that is attached to the crankshaft and helps the sensor detect the position and speed of the crankshaft. If the reluctor wheel is damaged or dirty, it can cause the sensor to malfunction. Check the reluctor wheel and clean or replace it if necessary.
- Check the engine timing: If the engine timing is off, it can cause the sensor to give incorrect readings. Check the engine timing and adjust it if necessary.
- Check the power supply: The sensor needs a stable power supply to function correctly. If there is a problem with the power supply, it can cause the sensor to malfunction. Check the power supply and repair or replace any damaged parts.
How Much Will It Cost to Fix the P1336 Code in a Nissan?
The cost of fixing the P1336 code in a Nissan can vary depending on the severity of the problem. In some cases, the issue may be resolved by simply cleaning or replacing the sensor. This can cost anywhere from $50 to $200, depending on the make and model of the vehicle.
However, if the problem is more severe, such as a damaged wiring harness or a faulty ECM, the cost of repairs can be much higher. In these cases, the cost of repairs can range from $500 to $1,500 or more.
Possible Causes and Fixes of Code P1336 Nissan
| Possible Cause | Fix | Cost to Fix |
|---|---|---|
| Failed Crankshaft Position Sensor | Replace the Crankshaft Position Sensor | $100-$300 |
| Wiring Issues | Repair or replace damaged wiring | $50-$200 |
| Failed Engine Control Module (ECM) | Replace the Engine Control Module (ECM) | $500-$1000 |
| Timing Chain Issues | Inspect and repair or replace timing chain | $500-$1500 |
How Serious is the P1336 Code in Nissan?
The P1336 code in Nissan indicates a problem with the crankshaft position sensor. This sensor is responsible for monitoring the position and speed of the crankshaft, which is essential for the engine to run smoothly. If the sensor is malfunctioning, it can cause a range of issues, including poor fuel economy, rough idling, and even stalling.
While the P1336 code is not an immediate threat to your safety, it is still a serious issue that needs to be addressed as soon as possible. Ignoring the problem can lead to further damage to your engine and more expensive repairs down the line.
Can You Still Drive with the P1336 Code on Your Nissan?
If you have a Nissan and the P1336 code appears, it means that there is a problem with the crankshaft position sensor. This sensor is responsible for monitoring the position and speed of the crankshaft, which is essential for the engine to run smoothly.
While it is possible to drive with the P1336 code, it is not recommended. The engine may run rough, stall, or even fail to start. This can be dangerous, especially if you are driving on the highway or in heavy traffic.
Conclusion
Overall, the P1336 code in Nissan vehicles can be a frustrating issue to deal with. However, it is important to address it promptly to avoid further damage to your engine. By understanding the causes and symptoms of this code, you can take the necessary steps to fix it.
Whether it requires replacing the crankshaft position sensor or addressing other underlying issues, it is best to seek the help of a professional mechanic to ensure a proper diagnosis and repair. With the right approach, you can get your Nissan back on the road and running smoothly once again.
FAQ
What is a P1336 code in Nissan?
A P1336 code in Nissan indicates a problem with the crankshaft position sensor. It means that the sensor is not providing the correct signal to the engine control module (ECM).
What are the symptoms of a P1336 code in Nissan?
The symptoms of a P1336 code in Nissan include engine misfires, rough idling, stalling, and difficulty starting the engine. The check engine light may also come on.
What causes a P1336 code in Nissan?
A P1336 code in Nissan can be caused by a faulty crankshaft position sensor, damaged wiring or connectors, or a problem with the ECM. It can also be caused by a damaged or worn timing chain or belt.
How do you diagnose a P1336 code in Nissan?
To diagnose a P1336 code in Nissan, a mechanic will use a scan tool to read the code and check the sensor’s signal. They may also inspect the wiring and connectors for damage or corrosion. If necessary, they may perform a visual inspection of the timing chain or belt.
How do you fix a P1336 code in Nissan?
To fix a P1336 code in Nissan, the faulty crankshaft position sensor must be replaced. The wiring and connectors should also be inspected and repaired if necessary. If the timing chain or belt is damaged or worn, it should be replaced as well. In some cases, the ECM may need to be reprogrammed or replaced.
Learn about more p codes in Nissan here.
